ProxMox: Difference between revisions

From FlowerHouseWiki
Line 69: Line 69:


=== RAID-Controller ===
=== RAID-Controller ===
<p>The RAID-Controller <syntaxhighlight lang="Bash" inline>Perc H310</syntaxhighlight> is installed, but I wanted an HBA-Controller, because I am using an software raid (zfs) and not an hardware raid</p>
<p>The RAID-Controller <syntaxhighlight lang="Bash" inline>Perc H310</syntaxhighlight> is installed, but I wanted an HBA-Controller, because I am using an software raid (zfs) and not an hardware raid.</p>
<p>Since <syntaxhighlight lang="Bash" inline>Perc H310</syntaxhighlight> is identically constructed as its counter part HBA-Controller it is possible to overwrite the firmware according to [https://www.taste-of-it.de/flash-dell-perc-h310-mit-lsi-9211-8i-it-mode/ this instructions].</p>
<p>Since <syntaxhighlight lang="Bash" inline>Perc H310</syntaxhighlight> is identically constructed as its counter part HBA-Controller it is possible to overwrite the firmware according to [https://www.taste-of-it.de/flash-dell-perc-h310-mit-lsi-9211-8i-it-mode/ this instructions].</p>



Revision as of 21:35, 21 February 2021

Proxmox.png

Network


IP: 192.168.88.6
192.168.88.7
MAC: 20:47:47:82:E0:BA
20:47:47:82:E0:BC
Domain: ve.flowerhouse.at

System


OS: ProxMox
RAM: 96GB
Cores: 10/20

ProxMox is reachable under 192.168.88.6:8006 which is located in the ServerVLAN.

The subdomain is ve.flowerhouse.at which is handled by the ReverseProxy.

List of servers running on ProxMox:

Name Domain Address Type
TrueNAS nas.flowerhouse.at 192.168.88.5 VM
Reverse-Proxy 192.168.88.9 LXC
NextCloud cloud.flowerhouse.at 192.168.88.10 LXC
FHEM home.flowerhouse.at 192.168.88.11 LXC
Heater heater.flowerhouse.at 192.168.88.12 LXC
DataBase db.flowerhouse.at 192.168.88.13 LXC
MediaWiki wiki.flowerhouse.at 192.168.88.14 LXC

Hardware

The server base is a Dell T320 bought on ebay.

SSD (Raid1)

Two Intel DC S3700 (400GB) Enterprise-SSD where bought and installed internal running in Raid1 where ProxMox and the VMs/LXCs are installed.

RAID-Controller

The RAID-Controller Perc H310 is installed, but I wanted an HBA-Controller, because I am using an software raid (zfs) and not an hardware raid.

Since Perc H310 is identically constructed as its counter part HBA-Controller it is possible to overwrite the firmware according to this instructions.

CPU

Originally the CPU Intel ??? was installed but since the hardware is already a bit old it is possible to buy it cheap.

I decided to install the best availaible CPU for the Socket ???? which is the Intel Xeon E5-2470V2 2.40GHz 10-Core 25MB.

Fan

At the beginning the original fan was used because it was quiet enough, but after installing the HHDs it got really loud.

It seems the mainboard adjust the fan according to the amount of PCIE-devices installed and it is not possible to change much of the fans behaviour.

The only solution was to replace the fan with an more quiet one, so the Noctua NF-A12x25 got installed.